First Use - universalblue UBHC3-18 Manual De Instrucciones

• The oven must be located in a manner that the socket used for
electrical connection or the double-pole switch is easily
accessible.
• Do not place the power supply cable in a way that it can contact
hot surfaces.
• If the power supply cable is damaged, contact with the store
where you bought this appliance.
• If you plan to connect the product directly to the electrical
installation, install a double-pole switch between the product and
the electrical installation and make sure that the grounding cable
is not cut of by the double-pole switch.
• It is not recommended to use adapters, multiple sockets or
extension cables. If you have to use any of these, use an adapter
or extension cable as per the applicable safety regulations.
However, never exceed the maximum current capacity or power
determined for the adapter.
• Once connection is completed, test the heating elements for
about 3 minutes.
• The product is under warranty only if the electrical safety is
ensured by connecting the product to suitable sources as per the
regulations. Our company cannot be held responsible for injuries,
environmental or material damages resulting from improper
grounding or electrical connection.

5. FIRST USE

Before using the oven for the first time, please read the instructions
below:
• Remove all baking trays and the oven rack.
• Set the temperature to the maximum level.
• Set the function button to BOTTOM and UPPER heating (and +
FAN, if any).
• Operate the oven for 30 minutes.
• During this process, the oven can emit odor and smoke. Do not
worry, this is absolutely normal during the first use. Wait until the
smell or smoke has disappeared before adding any food.
50