Omega Effortless JC2022 Manual Del Usuario página 21

WHEN AUGER STOPS DURING USE
1
작동스위치
정회전
역회전
2
작동스위치
정회전
역회전
정회전
o (정지)
정지 정지상태
역회전
정회전
o (정지)
정지 정지상태
역회전
1. If the Auger stops during operation, the
product automatically rotates in reverse
and then goes into a normal operation.
But, if the power is unstable, the reverse
rotation may not work. In such a case,
press the power button for over 1 second
to activate a reverse rotation.
The reverse rotation is a function that
returns the ingredients upward. It only
works while the power button is pressed
and, once you lift your finger from the
button, the Auger stops rotating.
2. After the auger is completely stopped
after a reverse rotation, press the power
button briefly to start the operation again.
When operating the extraction or reverse
rotation function, make sure to press
the power button after the auger has
completely stopped moving.
Note
If the machine does not work even after
following the above steps, pull the power
cord plug from the outlet, detach the
chamber set, wash it and use it again.
Due to its characteristics, the motor will
not stop at once but, instead, continue
to spin slowly in the direction of operation
before coming to a complete stop.
21