ASSEMBLY AND DISASSEMBLY OF SILICONE
Silicone packings are consumables that are recommended to be replaced once
every 6 to 12 months. They are available for purchase through the Customer Service
Center. (The juicer may leak if the product is not assembled properly.)
EXTRACTION PACKING
1
2
SEAL PACKING
1
2
1
Hold and take out the packing as if
you are pulling it back.
2
After cleaning, insert one side of the
packing first as if you are hooking it.
3
Insert the remaining part and press
down the perimeter.
JUICE CAP PACKING
After cleaning, insert in a way that the
round side of the packing faces outward
while the grid grooves face upward.
HOPPER PACKING
Assemble the packing as shown in
the figure.
CHAMBER PACKING
1
Grab one side and pull it back to detach it.
2
After cleaning, check the top and bottom of
the packing and insert it as if you are hooking
one side.
3
Firmly press the remaining part of the
packing without any folded area.
23