Removing The Battery Pack; Operating Tips - Toro 66120T Manual De Instrucciones

Shutting Off the Hedge
Trimmer
To shut off the hedge trimmer, release the trigger or
the auxiliary-handle switch
seconds for the cutting blade to stop moving.
Whenever you are not using the trimmer or are
transporting the trimmer to or from the work area,
remove the battery pack and install the protective
cover over the blades.

Removing the Battery Pack

Press the battery latch on the tool to release the
battery pack and slide the battery pack out of the tool
(Figure 9).
1. Battery latch
(Figure 6). Allow at least 5
Figure 9

Operating Tips

•
Use the power tool for cutting in either direction in
a slow, sweeping action.
•
When trimming new growth, use a wide sweeping
action so that the stems are fed directly into the
cutting blade.
•
Use a different tool to trim stems that are too large
for the trimmer.
•
If desired, you can use a string to help cut your
hedge level. Decide how high you want the hedge.
Stretch a piece of string along the hedge at the
desired height as a guideline. Trim the hedge just
above the string guideline.
g365019
10