Tabla de contenido
Publicidad
Water
intake
Automatic switch coupling
• Fix the automatic switch control with the coupling nut
and tighten by hand. Double-check the seal is in the right
position.
• Turn the automatic switch control into the required
position and tighten the coupling nut.
6
ENGLISH
Pressurized
water
outlet
Coupling
nut
Purge
cap
Pump
Water
drain cap
• The device shall be set in a horizontal surface that can
support the device weight when is filled with water.
• To prevent vibration set the device onto an elastic
surface (for example, a rubber mat).
• The fixing spot shall be well ventilated and protected
from wind and rain.
• When used in garden ponds or pools the device shall be
fixed preventing it to get flooded or fall into the water
deposit.
• When used inside please assure there is some type of
drain in the floor or a water leak prevention system.
Parts
Control automatic
switch
Carrying
handle
Assembly
Installation
Power
cord
Starting
switch
Engine
Publicidad
Tabla de contenido
