auna Mary Ann Manual De Instrucciones página 35

Reproduction of records
The unit is equipped with a full-size turntable with belt drive and three
speed levels. You can play 33, 45 and 78 RPM records.
1. Press the POWER/FUNCTION button to turn on the unit then set the
volume to a low level.
2. Use the POWER/FUNCTION button to enter Phono mode. PHONO will
be displayed on the top of the display. You can now start the record
playback.
3. Make sure that you have removed the needle guard and unlocked the
tonearm lock.
4. Set the correct speed (33, 45 or 78 RPM). If you want to play 45 RPM
records, place the 45 RPM adapter on the center spindle.
5. Place the record on the center spindle.
6. Pull the lever up to lift the tonearm off the holder. Move the tonearm to
the edge of the record. The turntable will begin to rotate automatically.
Carefully move the tonearm onto the record using the lever.
7. Adjust the desired volume.
8. As soon as the tonearm reaches the end of the record, the platter will
stop rotating automatically. Fix the tonearm manually to the holder
before ending use or change for another record.
9. Press the POWER button again to turn the unit off.
Note: Do not turn or stop the turntable manually. If you move the
turntable manually without fixing the tonearm to the holder, it may be
damaged.
BT Connection
1. Select the BT mode by pressing the FUNCTION button
2. Select the unit from the device list of your mobile device.
Pairing-Name für 10039052/10039053 = Mary Ann
Pairing-Name für 10041388/10039054 = Bella Ann
Pairing-Name für 10041389/10039055 = Julie Ann
3. Once the BT connection is established, you can listen to music from
your mobile device on your radio. Settings can only be made via your
device.
Note: If BT is not deactivated on the device, the BT connection is
automatically re-established as soon as BT is activated on the mobile
device and the mobile device is within range.
EN
35