Mx Onda MX-PI2633FLEX Manual De Usuario E Instalacion página 116

FLEXIBLE COOKING AREA
The flexible cooking zone is located on the left side of the induction hob and is
delimited by two horizontal lines, the pan must not exceed the rectangle formed
by both horizontal lines and their corresponding vertical lines (not drawn), white
area in the drawing.
Flexible cooking area
1. Turn on the hob, touch the Power on / off button 1 (
pan on the flexible cooking zone.
2. Touch one of the selection buttons 5 (
power indicator will show the default power level " 0 " flashing.
3. Touch the flexible cooking zone on / off button 7 (
light up and the power level indicators of the upper and lower left cooking
zone will show the default power level " 5 " blinking.
4. Touch the semicircle of the power level 2 selector
with your fingertip and make a circular motion to the
right or left to increase or decrease the power
respectively. The power level indicators for the upper
and lower left cooking zones will show the selected
power (1, 2, 3, etc.).
5. The power level of the flexible cooking zone can be varied at any time
during cooking. To do this, touch one of the selection buttons 5 (
6 ( ) and when the power level indicators start to flash, adjust the power
using the power level selector 2.
6. To turn off the flexible cooking zone, touch one of the
selection buttons 5 (
power level indicators start to flash, touch and hold
your finger for 3 seconds on the bottom left of the
power level selector 2 until the power indicators show
" - ".
) or 6 ( ) and when the
13
) and place a suitable
) or 6 ( ) and the corresponding
), the indicator 8 will
) or