Mx Onda MX-PI2633FLEX Manual De Usuario E Instalacion página 124

Precautions
1. The induction hob must be installed by licensed electricians or qualified
technicians. Please never do the operation on your own.
2. The induction hob cannot be installed directly over a dishwasher,
refrigerator, freezer, washing machine or dryer, as moisture can damage
the electronic components of the induction hob.
3. The induction hob will be installed so that better heat radiation can be
guaranteed to improve its reliability.
4. The wall and the induced heating zone on the table top must withstand the
heat.
5. To avoid any damage, the hob must be heat resistant.
CONNECTION OF THE INDUCTION HOB TO THE ELECTRICITY SOCKET.
The induction hob must be installed by a licensed electrician or
suitably qualified technician.
Before connecting the induction hob to the mains, check that:
1. The electrical installation where the induction hob is to be connected must
be suitable for the power consumed by the induction hob.
2. The voltage must correspond to the nominal value specified in the
characteristics described in this manual.
A B
Screw Support
Crystal
Junta
Fixing bracket
CristalJunta
Screw
Plate base
C
Screw hole Base
21
D
Worktop