Standard Accessories - HIKOKI G 13VE2 Instrucciones De Manejo

Wheel nut
Wrench
Abrasive cutting wheel
(sold separately)
Diamond wheel
(sold separately)
Mesh
SYMBOLS
WARNING
The following show symbols used for the machine.
Be sure that you understand their meaning before
use.
G13VE2: Disc Grinder
To reduce the risk of injury, user must read
instruction manual.
Always wear eye protection.
Always operate the power tool with two hands
Not for cut-off operations
When using a cutting-off wheel, be sure to
attach the Type A wheel guard.
When using a type B wheel guard for cutting-off
operations with bonded cut-off wheels, there is
an increased risk of exposure to emitted sparks
and particles, as well as exposure to wheel
fragments in the event of a wheel burst.
Only for EU countries
Do not dispose of electric tools together with
household waste material!
In observance of European Directive
2012/19/EU on waste electrical and electronic
equipment and its implementation in
accordance with national law, electric tools
that have reached the end of their life must
be collected separately and returned to an
environmentally compatible recycling facility.
V Rated voltage
Alternating current
n
Rated speed
min Revolution or reciprocations per minute
-1
Switching ON
Switching OFF
Lock
Unlock
Soft brush
Diamond cup wheel
(sold separately)
Dust collection adapter
(For diamond cup wheel)
(sold separately)
Dust collection adapter
(For diamond wheel)
(sold separately)
9
Disconnect mains plug from electrical outlet
Warning
Class II tool

STANDARD ACCESSORIES

In addition to the main unit (1 unit), the package
contains the accessories listed in the below.
○ Wheel guard .................................................................1
○ Guard clip .....................................................................1
○ Side handle ...................................................................1
○ Wrench .........................................................................1
Standard accessories are subject to change without notice.
APPLICATIONS
○ Removal of casting fi n and fi nishing of various types of
steel, bronze and aluminum materials and castings.
○ Grinding of welded sections or sections cut by means of
a cutting torch.
○ Grinding of synthetic resins, slate, brick, marble, etc.
○ Cutting of synthetic concrete, stone, brick, marble, and
similar materials.
SPECIFICATIONS
Model
Voltage
Power Input
Rated speed
Outer dia.
Wheel Hole Dia.
Thickness
Peripheral speed
Weight*
1
*1 Weight: According to EPTA-Procedure 01/2014
(Including wheel guard, wheel washer, wheel nut, and
handle; without cord)
Electronic control
○ Soft start
Reduces recoil against the operator by managing the
number of rotations during startup.
○ 0 Voltage Re-start Protection
The 0 voltage restart protection feature prevents the
power tool from restarting after the power has been
temporarily cut off during operation.
○ Constant speed
○ Overload protection
This protection feature cuts off the power to the motor
in the event of overloading of motor or a conspicuous
reduction in rotational speed during operation.
When the overload protection feature has been
activated, the motor may stop.
In this case, release the tool switch and eliminate causes
of overloading.
After that you can use it again.
English
G13VE2
230 V
1320 W
2500–8500 min
-1
125 mm
22.23 mm
6 mm
80 m/s
2.4 kg