Manuales relacionados para Truper AFB-118
Resumen de contenidos para Truper AFB-118
- Página 1 Manual Drill Bit 118° angle bits only Sharpener 118° 135° Applies for: Code Model 101684 AFB-118 USE AND CARE CAUTION RECOMMENDATIONS: Read the user’s manual thoroughly before operating this tool.
-
Página 2: Tabla De Contenido
Contents CAUTION Technical specifications To gain the best performance of Power requirements the tool, prolong the duty life, make the Warranty valid if General Power Tool Safety Warnings necessary, and to avoid hazards of fatal injuries please read and Safety warnings for the use of drill bit sharpeners understand this Manual before using the tool. -
Página 3: Technical Specifications
Technical specifications AFB-118 Code 101684 Description Drill Bit Sharpener Voltage 127 V Frequency 60 Hz Current 0.66 A Power 100 W Speed 1 500 RPM Grindstone diameter ø 3” Drill bit size 3 mm - 13 mm (1/8” - 1/2”) Conductors 18 AWG x 2C with insulation temperature of 221 °F... -
Página 4: General Power Tool Safety Warnings
General Power Tools Safety Warnings WARNING! Read carefully all safety warnings and instructions listed below. Failure to comply with any of these warnings may result in electric shock, fire and / or severe damage. Save all warnings and instructions for future references. -
Página 5: Safety Warnings For The Use Of Drill Bit Sharpeners
Safety warnings for the use of drill bit sharpeners Use the appropriate sharpening stone Indicated Drill Bits • Never try to use sharpening stones whose • This sharpener works only for 118° drill CAUTION WARNING diameter is larger than the corresponding size of the tool. bits (It is advisable to check the marking on your drill bit •... -
Página 6: Parts
Parts Cover screws Cover Washer Sharpening stone height control knob Grinding Drill bit insertion stone holes from 3 mm to 13 mm (1/8” - 1/2”) Debris Shaft ejector Base of stone Spring Ventilation holes Switch Power cord Ventilation slots ENGLISH... -
Página 7: Start Up
Start Up Drill Bits • This sharpener works for 118°bits WARNING only. Attempting to sharpen bits with any other angle will cause damage to the bit and sharpening stone. 118° Operation 1. Turn the knob (A) counterclockwise towards the DOWN direction to set the stone in its lower position. 2. -
Página 8: Maintenance
Maintenance Disconnect the power cord from the outlet WARNING Service before making any adjustment, service or maintenance to the tool. Tool service should only be performed at a Authorized Service Center. Service Cleaning And Care and maintenance by unqualified persons can be •... -
Página 9: Troubleshooting
Troubleshooting ENGLISH... -
Página 10: Notes
Notes ENGLISH... -
Página 11: Authorized Service Centers
In the event of any problem contacting a Authorized Service Center, please see our webpage www.truper.com to get an updated list, or call our toll-free numbers 800 690-6990 or 800 0187-8737 to get information about the nearest Service Center. DE TODO PARA LA CONSTRUCCIÓN FIX FERRETERÍAS... -
Página 12: Warranty Policy
. Transportation costs resulting from compliance of this warranty will be covered by For questions or comments, call 800-690-6990. Made in China. Imported by Truper S.A. de C.V. Parque Industrial 1, Parque Industrial Jilotepec, Jilotepec, Edo. de Méx. C.P. 54257 Stamp of the business.