Establishing Connections - Kipp & Zonen SMP12 Instrucciones De Servicio

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 140
Installation and commissioning | 4

4.5.3 Establishing connections

4 To establish a connection to the pyranometer, click on the Setup Connection button.
4 Activate the Serial RTU protocol to establish the direct RS-485 connection.
4 Select the COM port (see Windows Device Manager).
4 Leave the other factory settings unchanged.
4 Click on the Confirm button to save the settings.
SMP12 Smart Pyranometer | EN
21

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido