en
The unit is approved for use up to
n
4,000 m above sea level according to
IEC 60335.
The standards specified here apply to Ger-
many.
In all other countries, the specific national
and regional standards and regulations
which concern the installation and opera-
tion of commercial ventilation hoods must
be complied with.
1.5 Liability and warranty provisions
Liability
Installations and repairs not carried out by
professionals authorised by the manufac-
turer or not using original service parts,
and technical modifications to the unit,
which are not approved by the manufac-
turer, may void the manufacturer's product
liability.
Warranty
Damage occurring as a result of non-com-
pliance with this installation manual is ex-
cluded from the warranty.
The following are also excluded from the
warranty:
Damage resulting from improper use,
n
installation, maintenance or repair
Use of the unit for purposes other than
n
those for which it is intended
Modifications or technical alterations
n
to the unit not authorised by the man-
ufacturer
Use of non manufacturer-original ser-
n
vice parts
Damage to glass, light bulbs and seal
n
materials
18 / 160
2
2.1 Warning symbols
Type and source of danger
Non-compliance will lead to very
serious injury or death.
Preventative measures
Type and source of danger
Non-compliance can lead to serious
injury or death.
Preventative measures
Type and source of danger
Non-compliance can lead to minor or
moderate injuries.
Preventative measures
Failure to heed the NOTICE can lead to
damage to the unit.
2.2 General safety instructions
This UltraVent condensation hood is de-
signed in such a way that it presents no
danger if installed according to instruc-
tions. This manual describes how to install
the UltraVent condensation hood cor-
rectly.
80.51.570_iCombi Pro-iCombi Classic_UV P_IM_V01_EU-west
Safety
DANGER
WARNING
CAUTION
NOTICE
2 | Safety