Maintenance - Rational UltraVent Plus Manual De Instalación Original

6 | Maintenance

1. Turn the unit on (Combi-Duo: both
units).
>>
When starting up, the unit recognises
the condensation hood and establishes
the connection independently.
6 Maintenance
WARNING
Non-regular cleaning of the UltraVent
condensation hood
Risk of fire due to dirty condensation
hood.
Clean the condensation hood regularly
according to the manufacturer's
recommendations.
CAUTION
Sharp-edged panels
Risk of cuts when taking off the
UltraVent condensation hood lid.
Wear protective gloves during
installation and maintenance.
Clean the lid and interior of the
condensation hood
a
The unit on which the condensation
hood is to be installed is disconnected
from the mains.
a
The condensation hood is disconnec-
ted from the mains.
1. On the rear side of the condensation
hood, remove the 4 screws attaching
the heat shield, and remove the heat
shield.
2. Remove the 2 screws on the top side
of the condensation hood
[ Photo 33].
80.51.570_iCombi Pro-iCombi Classic_UV P_IM_V01_EU-west
3. Lift up the lid of the condensation
hood.
4. If the lid is dirty, clean the lid with a
grease remover.
5. If the lid is very dirty, remove the
screws in the lid and disassemble it
[ Photo 34], to clean the lid in the
dishwasher.
6. Remove the filter cassette from the in-
terior of the condensation hood (see
HEPA filter replacement).
7. Clean the interior of the condensation
hood with a grease remover.
[ Photo 35].
8. Mount the filter cassette in the interior
of the condensation hood (see HEPA
filter replacement).
9. Secure the lid of the condensation
hood with the 2 screws.
10. Secure the heat shield on the rear side
of the condensation hood with the 4
screws.
Cleaning the particle filter and interior of
the condensation hood
a
The unit on which the condensation
hood is to be installed is disconnected
from the mains.
a
The condensation hood is disconnec-
ted from the mains.
1. Remove the particle filter and clean the
filter in the dishwasher.
2. On the front side, remove the prefilter
[ Photo 36] and clean the prefilter in
the dishwasher.
3. Spray the interior of the condensation
hood with a mild cleaning agent
[ Photo 35].
4. Clean the interior of the unit with the
hand shower.
en
25 / 160