Technical safety
Batteries will deplete over time. They can then leak cor-
rosive fluids. Avoid contact with the eyes and skin. In the
event of contact, rinse thoroughly with water and seek
medical advice.
The AP01/AP02/AP03 battery, the LG01/LG02 charger
and the LS03 charger cradle are designed for use with the
Miele HS19 vacuum cleaner. For safety reasons, the va-
cuum cleaner must not be used with a battery, charger or
charger cradle produced by another manufacturer.
If you are using a mains plug adapter, make sure that it
is approved for continuous operation.
Temporary or permanent operation on an autonomous
power supply system or a power supply system that is not
synchronised with the mains power supply (e.g. island net-
works, back-up systems) is possible. A prerequisite for op-
eration is that the power supply system complies with the
specifications of EN 50160 or an equivalent standard.
The function and operation of the protective measures
provided in the domestic electrical installation and in this
Miele product must also be maintained in isolated opera-
tion or in operation that is not synchronised with the mains
power supply, or these measures must be replaced by
equivalent measures in the installation. As described, for
example, in the current version of BS OHSAS 18001–2 ISO
45001.
en - Warning and Safety instructions
67