Removing the USB device
1 Stop the USB device playback.
2 Remove the USB device.
If you remove your USB device during
playback, data in the USB device may be
damaged.
Notes
• Do not use USB devices so large or heavy that they
may fall down due to vibration, or cause a loose
connection.
• This unit cannot recognize USB devices via a USB
hub.
• If the USB is disconnected during playback, "NO
Device" appears in the display of the unit.
Display items
A
A Source (MP3/WMA/AAC) indication
B Clock
C Artist name/Album name, Track name, Folder
number/Track number/Elapsed playing time
To change display items C, press
(DSPL/SCRL).
Notes
• Displayed items will differ, depending on the USB
device, recorded format and settings. For details,
visit the support site.
• The maximum number of displayable data is as
follows.
– folders (albums): 128
– files (tracks) per folder: 512
• Do not leave a USB device in a parked car, as
malfunction may result.
• It may take time for playback to begin, depending on
the amount of recorded data.
• DRM (Digital Rights Management) files may not be
played.
• During playback or fast-forward/reverse of a VBR
(Variable Bit Rate) MP3/WMA/AAC file, elapsed
playing time may not display accurately.
• Playback of the following MP3/WMA/AAC files is not
supported.
– lossless compression
– copyright-protected
16
B
C
Repeat and shuffle play
1
During playback, press (1) (REP) on
the card remote commander or (SHUF)
on the unit repeatedly until the desired
setting appears.
Select
Repeat Track
Repeat Album
Shuffle Album
Shuffle Device
To return to normal play mode, select "Repeat
off" or "Shuffle off."
After about 3 seconds, the setting is complete.
To play
track repeatedly.
album repeatedly.
album in random order.
device in random order.