Using Optional Equipment; Auxiliary Audio Equipment - Sony CDX-GT980UI Manual De Instrucciones

Information
Displays the items (depending on the source,
etc.): "on," "off."
Dimmer
Changes the display brightness.
– "Auto": to dim the display automatically when
you turn lights on. (Available only when the
illumination control lead is connected.)
– "on": to dim the display.
– "off": deactivate the dimmer.
Illumination
Changes the illumination color: "Blue," "Red"
or "Green."
Black Out
Turns off the illumination automatically for any
source (e.g., during CD playback/radio
reception, etc) if no operation is performed for 5
seconds: "on," "off."
To bring the light back on, press any button on
the unit. (When activated, remote operation is
unavailable.)
Auto Scroll
Scrolls long items automatically: "on," "off."
Play Mode
Local (Local Seek Mode)
– "on": to only tune into stations with stronger
signals.
– "off": to tune normal reception.
Mono*
2 (Monaural Mode)
Selects monaural reception mode to improve
poor FM reception: "on," "off."
Zappin Time*
3
Selects the playback time for the ZAPPIN
function.
– "1 (about 6 seconds)," "2 (about 9 seconds),"
"3 (about 30 seconds)."
BTM (page 13)
*1 When the unit is turned off.
*2 When FM is received.
*3 When CD/USB/iPod source is activated.

Using optional equipment

Auxiliary audio equipment

By connecting an optional portable audio device
to the AUX input jack (stereo mini jack) on the
unit and then simply selecting the source, you
can listen on your car speakers. The volume level
is adjustable for any difference between the unit
and the portable audio device. Follow the
procedure below:
Connecting the portable audio
device
1 Turn off the portable audio device.
2 Turn down the volume on the unit.
3 Connect to the unit.
On the rear
Connect to the AUX IN terminals
Adjust the volume level
Be sure to adjust the volume for each connected
audio device before playback.
1 Turn down the volume on the unit.
2 Press (SOURCE) repeatedly until "AUX"
appears.
3 Start playback of the portable audio device at a
moderate volume.
4 Set your usual listening volume on the unit.
5 Adjust the input level (page 19).
Connecting cord
(not supplied)
21