Publicidad
Idiomas disponibles
Idiomas disponibles
COMPONENTS
1
Tap for M14 thread inserts, HSS-G steel, 16 mm hexagon drive
2
Thread inserts, M14x1.25 internal thread, black finish, length 11-16-19 mm
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third parties.
INTENDED USE
This set is used to repair spark plug internal thread M14x1.25 in the cylinder head.
The set contains five thread inserts each in lengths of 11, 16 and 19 mm.
SAFETY INFORMATIONS
• Keep children and other persons away from the working area.
• Do not allow children to play with this tool or its packaging.
• Do not use the tool if parts are missing or damaged.
• Use the tool for the intended purpose only.
• Remove the ignition key before beginning the repair to prevent accidental starting of the engine
by third parties and resulting injuries.
ENVIRONMENTAL PROTECTION
Recycle unwanted materials instead of disposing of them as waste. Packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with
the environment. Contact your local solid waste authority for recycling information. Dispose
of this product at the end of its working life environmentally.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Repair Kit for Spark Plug Threads
M14 x 1.25 mm
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 149
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Publicidad
