Publicidad
Step 16
å
Insert a SLIDE CAM (10A) into the DRAWER SIDES (D87 and D88).
å
Fasten the EXTENSION SLIDES (40MC) to the DRAWER SIDES (D87 and D88).
Use four GOLD 5/16" FLAT HEAD SCREWS (3S) through holes #1 and #4.
å
NOTE: The screw head in the CAM must be visible through the slotted hole in
the SLIDE.
å
Fasten the PULLS (189K) to the DRAWER FRONT (J) as shown. Use four
BLACK 9/16" LARGE HEAD SCREWS (1S).
1
2
3
4
www.sauder.com/service
10A
Open end
J
189K
Center the screw in the oval hole.
BLACK 9/16" LARGE HEAD SCREW
(4 used in this step)
Drawer Slide
426510
1S
Screw head - turn CAM to line up holes in
the SLIDES with holes in DRAWER SIDES
10A
3
4
GOLD 5/16" FLAT HEAD SCREW
(4 used for the SLIDES)
7
Open end
1
2
3S
Page 21
Publicidad
