Publicidad
Step 19
å
To make adjustments to the drawer, loosen SCREW #4 in the SLIDES a 1/4 turn, then turn the cam clockwise or counter-
clockwise. Notice how the drawer raises or lowers as you turn the cam. By adjusting the drawer this way, it will help the
DRAWER FRONT line up better when closed. Tighten the SCREWS when finished with adjustments.
å
NOTE: Please read the back pages of the instruction booklet for important safety information.
å
This completes assembly. Clean with a damp cloth. Wipe dry.
And to celebrate, why not share your success story at sauder.com or
Loosen screw #4 a 1/4 turn, turn the cam a 1/4 turn
maximum in both the clockwise and counter-clockwise
directions to make adjustments, and then tighten screw #4.
The higher the screw in the oblong hole,
the higher your drawer front will be. The
lower the screw, the lower the drawer front.
Page 24
Cam
426510
13
www.sauder.com/service
Publicidad
