IRUDEK PRO11 Manual De Instrucciones página 6

FECHA OBJETO
(Revisión periódica /
Reparación)
Organismo notificado que ha efectuado el examen CE de tipo : VVUU a.s., Pikartska 1337/7, 716 07 Ostrava-
Radvanice, Czech Republic (Organismo notificado número 1019 ) y organismo notificado que interviene en la fase de
control de la producción: VVUU a.s., Pikartska 1337/7, 716 07 Ostrava-Radvanice, Czech Republic (Organismo
notificado número 1019 )
CAREFULLY READ THE INSTRUCTIONS BEFORE USING THE BEAM ANCHOR
The fixed beam anchor is designed for use as part of a personal fall protection system and is designed to be used as an
anchorage point in a fall arrest system and classified as PPE (Personal Protective Equipment) by the European PPE
Regulation EU 2016/425 and are in conformity to the European Norm EN 795:2012 B.
The declaration of conformity is available at the following internet address:
http://www.irudek.com/es-es/descargas/
WARNINGS:
This product is to be used as an anchorage point for either a shock-absorbing lanyard or self-retracting lifeline for fall
arrest, or with a positioning lanyard for restraint. This unit should not be used for material handing or any other use
other than that of a protection anchorage device. This product is intended for one person using.
SPECIFICATION OF THE PRODUCT
•
Load Bar Material: Aluminium Alloy 7075-T6
•
Clamps (Jaws) With Roller: Aluminium Alloy 7075-T6
•
D-Ring Material: Steel Alloy SAE4140- Nickel plating
•
End Screw Material: Carbon Steel – Nickel plating
•
Spring Material: Stainless steel
•
Webbing Material: Polyester
•
Minimum Breaking Strength: 15kN (3300LBS)
•
Weight: 2,2kgs (5LBS)
VERIFICADOR
Nombre + Firma
INSTRUCTION MANUAL
BEAM ANCHOR IRUDEK PRO11
M A X 2 3 m m
M a x 2 6 5 m m
M i n 8 4 m m
COMENTARIOS
ENG
PRÓXIMA
FECHA
Revisión