Warranty Statement; Know Your Unit; Assembly Instructions - Craftsman 316.791930 Manual Del Operador

If this Craftsman product fails due to a defect in material or workmanship within two years from the date of purchase, return it to any Sears
store, Parts and Repair Service Center, or other Craftsman outlet in the United States for free repair (or replacement if repair proves
impossible).
This warranty applies for only 90 days if this product is ever used for commercial or rental purposes.
This warranty covers ONLY defects in material and workmanship. Sears will NOT pay for:
• Expendable items that can wear out from normal use within the warranty period, such as cutting line, air cleaner or spark plug.
• Repairs necessary because of accident or failure to operate or maintain the product according to all supplied instructions.
• Preventive maintenance, or repairs necesary due to improper fuel mixture, contaminated or stale fuel.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
APPLICATIONS
As a trimmer:
• Cutting grass and light weeds.
• Edging
• Decorative trimming around trees, fences, etc.
Hassle Free
ADJUSTING THE D-HANDLE
1. Loosen the screws on the
D-handle (Fig. 1).
2. While holding the unit in
the operating position
(Fig. 12), position the D-
handle to the location
that provides you the best
grip.
3. Tighten the clamp screws
evenly, until the D-handle
is secure.

WARRANTY STATEMENT

CRAFTSMAN FULL WARRANTY
Sears, Roebuck and Co., Hoffman Estates, IL 60179
On/Off Stop Control
D-Handle
Attachment
Shaft
Cutting Head Shield
Line Cutting
Blade
® PLUS Cutting Head

ASSEMBLY INSTRUCTIONS

Shaft Grip
Screws (4)
D-Handle
Minimum
6 in.
(15.24 cm)
Bottom
Fig. 1

KNOW YOUR UNIT

Starter
Rope Grip
Shaft Grip
Throttle
Control
INSTALL LINE TRIMMER ATTACHMENT
NOTE: To make installation easier, place the unit on the ground or
on a workbench.
1. Turn knob counterclockwise to loosen coupler (Fig. 11).
2. While firmly holding attachment, push it straight into the coupler
until the release button snaps into the primary hole (Fig. 10).
NOTE: Aligning the release button with the guide recess (Fig. 9) will
help installation.
3. Turn the knob clockwise to tighten.
LINE TRIMMER APPLICATIONS
Clamp
Cutting grass and light weeds; edging; and decorative trimming
around trees, fences, etc.
4
Spark Plug
Muffler
Fuel Cap
Choke Lever
Air Filter
Cover
Oil Fill Plug
Primer Bulb