Dometic CVI Serie Instrucciones De Montaje Y De Uso página 12

Heat level Suitability
7 – 8 Sautéing
Cooking pasta
CVI1525 only:
Fast simmering
Cooking rice
9 Stir-frying
Searing
Boiling water
Using the cooktop
CVI1350 only
1. Touch the button.
✔ The indicators display
✔ The standby mode is activated.
✔ The power level indicator displays
2. Place a suitable cookware on the cooking
zone to be used. Note chapter "Choosing the
right cookware" on page 11.
✔ If the power level indicator displays
play switches off after 2 minutes. See chapter
"Troubleshooting" on page 14.
3. Set the cooking zone power level by using the
and button.
✔ The cooktop switch off after 1 minute if no power
level is set.
CVI1525 only
1. Touch the button.
✔ The indicators display
✔ The standby mode is activated.
2. Place a suitable cookware on the cooking
zone to be used. Note chapter "Choosing the
right cookware" on page 11.
3. Touch the button of the cooking zone that
is to be used.
✔ The power level indicator displays
✔ If the power level indicator displays
play switches off after 2 minutes. See chapter
"Troubleshooting" on page 14.
4. Set the cooking zone power level by using the
and -button.
12
or .
.
, the dis-
or .
.
, the dis-
✔ The cooktop switch off after 1 minute if no power
level is set.
Switch off the cooktop
CVI1350 only
1. Turn the cooking zone off by touching the
button until the time indicator displays
✔
is displayed as long as a cooking zone is hot.
2. Touch the -button to switch off the cooktop
CVI1525 only
1. Touch the button of the cooking zone that
is to be switched off.
2. Turn the cooking zone off by touching the
button until the indicator time indicator dis-
plays .
✔
is displayed as long as a cooking zone is hot.
3. Repeat the procedure with the other cooking
zone when it is turned on.
4. Touch the button to switch off the cook-
top.
Using the lock
➤Touch the
button, to lock the display.
✔ The time indicator displays
✔ All touch buttons except the
button are disabled.
➤Touch the
button and hold for a few sec-
onds, to unlock the display.
Using the BOOST function
When the BOOST function is activated, the cook-
ing zone is heated up for max. 5 minutes at a
higher power level.
CVI1525 only: The BOOST function cannot be
performed on both cooking zones at the same
time.
CVI1350 only
1. Ensure that the cooking zone is set to the max.
temperature.
✔ If the cooking zone is not operated at the max.
power level, the power level indicator flash.
2. Touch the button.
.
.
button and the
EN