auna Vertico Swing DAB Manual De Instrucciones página 38

EN
38
Search setting (how to search for radio stations)
1. In FM mode, press and hold the "MENU" button and then press the
"Forward" and "Backward" buttons on the unit (or the "Up" and "Down"
buttons on the remote control) to switch select the "Scan" setting and
press the "OK" button to start the scan.
2. Press the "Forward" and "Backward" buttons on the unit (or the "Up" and
"Down" buttons on the remote control) to select "Strong station only"
or "All stations". Then press the "OK" button to confirm the start of the
search. If you select "Strong station only", the radio will only search and
play stations with a strong signal. If you select "All stations", the radio
also searches for stations with a weak signal and plays them.
Audio settings
1. In FM mode, press and hold the "MENU" button and then press the
"Forward" and "Backward" buttons on the unit (or the "Up" and "Down"
buttons on the remote control) to switch to select "Auto" and press the
"OK" button to confirm the setting.
2. Press the "Forward" and "Backward" buttons on the unit (or the "Up"
and "Down" buttons on the remote control) to select "Forced mono"
or "Stereo allowed". If the radio signal is weak, please select "Forced
mono" to get better sound quality.