Humanscale Float Instrucciones De Montaje página 10

Remove the Shipping Safety Pin
1
Turn the Float back upright.
2
The Safety Pin is used only for shipping purposes
and must be removed. Locate Safety Pin on the
back at the top of the Left leg and remove.
Set up work-station
1
Move the table into location. Set up the
components of your workstation, including
monitor(s), monitor support, computer,
keyboard, etc.
Before operation, you must add workstation
components to the worksurface weighing a
minimum of 30 lbs (13.5 kg) and a maximum
of 130 lbs (60 kg).
MIN Max
30lbs. 130lbs.
(13.5kg) (60kg)
To use and calibrate the float table proceed to
the next section.
10
2