Humanscale Float Instrucciones De Montaje página 9

Install the Mounted Tension Adjuster
Handle (optional accessory)
1
Insert the hexagonal metal shaft of the Mounted
Tension Adjuster Handle into the Tension Adjuster
Screw on the front of the crossbeam.
2
Position the Mounted Tension Adjuster Handle onto
the worksurface.
Humanscale Worksurface - Align the mounting
holes with the corresponding pilot holes on the
worksurface.
Your own Worksurface - Position the Handle so
the metal shaft is perpendicular to the cross-beam.
3
Using a #2 Phillips driver, secure the Handle to the
worksurface using four No. 8 × 1/2" pan-head
wood screws.
4
Snap the cover onto the Tension Adjuster Handle.
1
3
2
4
9