competitor ("C").
The race will end as soon as one of
the participants finishes the race. If the
user fnishes first, YOU WIN will
appear
on
the
competitor finishes first, YOU LOSS
will be shown on the screen.
PULSE
INSTRUCTIONS – USE.-
TELEMETRIC PULSE
The monitor is equipped to receive
signals
from
measurement system.
The system comprises of a receiver
and a transmitter (chest band not
included) Fig.4.
(See telemetric pulse rate instruction
book).
TROUBLESHOOTING GUIDE.-
Problem: The display does not come
on or the displayed segments are very
weak.
Solution:
a.- Check that the batteries are fitted
screen.
If
MEASUREMENT
RATE.
a
telemetric
correctly.
b.- Check the battery charge.
c.- If they are run down change them
immediately.
the
Problem: Display segments of a
function read-out are not visible or
error
function appear.
Solution:
a.- Remove the batteries for 15
seconds and then refit them correctly.
pulse
b.- Check the battery charge If they
are run down change the batteries
c.- If the above steps do not help then
replace the electronic monitor.
Avoid leaving the electronic monitor in
direct sunlight as this might damage
the liquid crystal display. Similarly, do
not expose it to water or knocks.
THE MANUFACTURER KEEPS THE
RIGHT TO MODIFY THE PRODUCT
SPECIFICATIONS
PREVIOUS ADVISE.
8
messages
for
a
particular
WITH
NO