5.3. TEMPERATURE CONTROL
When the room temperature is lower than the selected temperature, the heating element
is activated.
To indicate that the product is consuming, the last LED indicating temperature will perform
a fade-in/fade-out.
5.4. KEYPAD LOCK
By pressing the
and
locally and, in this state, the keys will not respond to keystrokes (with some exceptions).
The on/off button
locking.
To perform the on/off action, the button
device will respond to this command.
If any button is pressed while the device is locked, all LEDs will flash twice.
5.5. MAX POWER MODE
The MAX POWER mode activates the towel rail heating element to maximum power
continuously regardless of the sensor reading. To activate this function from the control
panel, press the button
switched off.
Pressing
once will activate this mode for 15 minutes. If you press it again within the
next two seconds, the next period (30 minutes) will be activated. Consecutive presses will
activate the following periods as shown in the table below:
Indicator
1 LED
Led 1: flashing
Led 2: OFF
Led 3: OFF
Led 4: OFF
Led 5: OFF
Led 6: OFF
Led 7: ON
VENEZIA OVAL WI-FI ELECTRIC TOWEL RAIL
keys together for 3 seconds, you can lock/unlock the keyboard
will respond even if it is locked, both with local locking and remote
. You can also activate this mode, even when the product is
LED
Time
15
minutes
must be held down for 3 seconds, and the
Indicator
2 LED
Led 1: flashing
Led 2: flashing
Led 3: OFF
Led 4: OFF
Led 5: OFF
Led 6: OFF
Led 7: ON
LED
Time
30
minutes
EN
15