Wind Bobbin Thread - Premier MCO-5199 Manual De Instrucciones

Wind Bobbin Thread
1. Put reel on the bobbin winder bracket
and draw out thread;
2. Wind thread by the winder holder;
3. Put thread through pinhole in the
bobbin and then fit bobbin into bobbin
winder spindle;
4. Pull bobbin winder spindle rightward;
5. Hold thread end by hand;
6. Slightly step on the foot pedal
controller, wind it for about ten circles
and then release your hand, step down
controller until 80% of thread is wound;
7. Cut the thread;
8. Return bobbin winder spindle leftward
and remove the bobbin.
Note: the thread winding shall be
operated with separating from the sewing structure (so that hand wheel couldn't rotate); bobbin
winder spindle must return to its position leftward before sewing operation.
P-8