Tabla de contenido
Publicidad
8.6 Replace garbage bag:
When indicator "Full" lights up, you need to replace the garbage bag.
Hold
the
'Clean'
button for 2 secons,
wait for the waste
bin
to
change
position, open de
waste bin and take
out garbage bag
The drawstring of the
new garbage bag is
aligned with the tie-
uppile and the lower
edge of the bag opening
is clamped under the
location clip
Press the drawstring into
the tie-up pile, tighten
and wind it
Notice:
The "Full" prompt is only a reference value. When using different types of cat litter, its
Ø
volume, density and fluidity will affect the judgement of "Full" prompt. In the APP, you
can adjust the delay of "Full" prompt according to your own use. The default value is
0(there is still a little space in bag for garbage), and the maximum value can be adjusted
to 15.
If you have restarted the machine, the delay of "Full" prompt will be restored to the
Ø
default value 0, which can be reset in the APP if necessary.
Normally, the storage capacity of one cat can reach 15 days, and three cats can reach 5
Ø
days. Users can replace the garbage bag every 5 days depending on the number of cats
or temperature conditions.
It will take 60 secons to
change the waste bin
position.
Then,
device
automatically
returns. after the new
bag is not placed within,
you can continue.
Wrap the garbage bag
around the outer frame
of the waste bin gate,
and
pull
out
drawstring
After
the
installation,
confirm that the flip door
is not blocked and can be
open en close normal.
Place the rest part of the
bag into the empty room
to prevent it being trapped
- 25
the
the
Publicidad
Tabla de contenido
