WERKU WK403260 Instrucciones Originales página 2

ENG ORIGINAL INSTRUCTIONS
CE DECLARATION CONFORMITY.
Werku ® declares that the WK403260 sander is
in accordance with the following Directives and
Standards:
2006/42/EC
2014/30/EU
EN60745-1:2009/A11:2010
EN60745-2-3:2011/A13:2015
EN55014-1:2006/A2:2011
EN55014-1:2017
EN55014-2:1997/A2:2008
EN55014-2:2015
EN61000-3-2:2014
EN61000-3-3:2013
La Coruña, 01/07/2021
R Yáñez
Werku Tools SA
TECHNICAL CHARACTERISTICS.
Voltage-frequency .............................. 230V~50Hz
Power .......................................................... 400W
Class ................................................................... I
Protection index ........................................... IPX0
Speed rate .................................... 900-2100 min
Speeds ............................................................... 7
Disc diameter .......................................... 225 mm
Axis measure ................................................. M-6
Total length .................................. 1300-2200 mm
Graduation ................................................... 0-45º
Net weight .................................................. 2.9 kg
Acoustic pressure LpA .....................
Respective uncertainity KpA .................... 3 dB(A)
Acoustic pressure LwA ................... 100.5 dB(A)
Respective uncertainity KwA .................... 3 dB(A)
Vibration Ah (handle) .......................... 4.68 m/s²
Vibration Ah (auxiliary handle) ............ 3.36 m/s²
Respective uncertainity Kh ..................... 1.5 m/s²
VIBRATION.
The declared vibration total value has been
measured in accordance with a standard test
method and may be used for comparing one power
tool with another. The declared vibration total value
may also be used in a preliminary assessment
of exposure. Warning: vibration emission during
actual use of the power tool can differ from the
declared total value depending on the ways in
which the power tool is used. Warning: identify
safety measures to protect the operator, based on
an estimation of exposure in the actual conditions
of use.
PICTOGRAMS.
-1
SAFETY INSTRUCTIONS.
This power tool is intended to function as a sander.
Read all safety warnings, instructions, illustrations
and specifications provided with this power tool.
Failure to follow all instructions listed below may
result in electric shock, fire and/or serious injury.
Keep all warnings and all instructions for future
89.5 dB(A)
reference. Accidents can be avoided in many
cases by recognizing a potentially hazardous
situation before it occurs and by observing
appropriate safety procedures. Operations, such
as grinding, wire brushing, polishing or cutting-off
are not recommended to be performed with this
power tool. Operations for which this power tool
was not designed may create a hazard and cause
personal injury.
WORK AREA SAFETY.
Keep work area clean and well lit. Cluttered and
dark areas invite accidents. Do not operate this
power tool near flammable materials. Sparks
could ignite these materials. Keep away from
children and curious while operating a power
2
English
Read instruction manual
Wear eye protection
Wear ear protection
Wear mouth and nose protection
Connect to earth
European conformity
TÜV-GS certification
RAEE directive