Solar Charging; Vehicle Alternator Charging - EcoFlow POWER HUB Manual Del Usuario

EN

Solar Charging

The Power Hub has three PV (Photovoltaic) input ports, with a total power of 4800 W for
the three ports and 1600 W for each port. Any brand of solar panel can be used as long as
it meets the specifications of the solar charging input. For EcoFlow 100w rigid or flexible
solar panel, up to 6S3P can be connected to each port, for EcoFlow 400w rigid solar panel,
up to 4S1P or 2S2P can be connected to each port, for EcoFlow 400w foldable solar panel,
up to 3S1P or 2S2P can be connected to each port.
PV3 Port
PV2 Port
PV1 Port

Vehicle Alternator Charging

The Power Hub has three alternator charging input which supports 12V, 24V or 48V
alternator. Each port will draw 1600W Max, The max charging current of ALT IN1 Port
is 60 A, while the other two is 30 A. Only ALT IN1 charging current can be adjusted via
EcoFlow App or Power Kit Console.
It is strongly recommended to unplug the alternator charging cable from the Power
Hub when vehicle is not in use for a long time.
Fuse-100A (Not
10
included)
(S: series, P: parallel)
Charging: White light flashing
Fully charged: White light stays on
Error: Orange light flashing
Charging : White light flashing
Fully charged : White light stays
still
Error : Orange light flashing