VANTRUE Element 1 Manual Del Usuario página 29

Note:
1. Motion detection mode can only be engaged when the camera is
turned on. Once the camera is turned off, the motion detection mode
will not work.
2. The resolution of 1944P and 1440P HDR do not support the pre-record-
ing function, so after enabling motion detection, the resolution will
automatically be changed to 1440P for recording.
Low Bitrate Recording
When the low bitrate mode is on, the
lower right corner of the screen if 1080P 15FPS is selected, and the
will be displayed in the lower right corner of the screen if 720P 15FPS is
selected.
If no movement is detected after 5 minutes of recording, there will be a
+ icon that appears in the center of the screen. The resolution of all
current video will be automatically switched to 1080P 15FPS or 720P 15FPS
for recording, and the recording duration is determined according to the
currently set loop recording duration. When the camera vibrates or is
moved, it will automatically exit, wait 5 minutes, and enter again.
2560x1440P 30FPS
120
00:00:37
08-20-2022 14:09:07 MP/H
icon will be displayed in the
- 25 -
N E N N E N E E
N E N N E N E E
icon