Water Connection - BONAIRE 2800 Manual Del Propietário

Bonaire Window Cooler
Installation

Water Connection

Install a sillcock and water valve (not supplied) to the faucet
closest to the cooler and attach water supply line between
cooler and water valve.
Install the float valve in hole under side pads (left or right
side, the faucest closest to water supply)
Water Level / Float Valve
valve is a mechanical type. Make the adjustment bending the rod tight as position marked be-
llow. If the valve is leaking, it may require replacement.
Note: Water supply line to float valve must be flushed before connecting.
Note: Some discharge from the overflow may be experienced after shut down due to
water draining back from the filter pad. This is normal.
Your cooler is now ready for startup checklist (see below).
12
Page