Indoor Unit - Alecto WS-1200 Manual De Instrucciones

Indoor unit:

Insert 2 AAA 1.5-volt alkaline batteries with the correct polarity in the battery
compartment of the indoor unit. The indoor unit will beep after installation.
After installing the batteries in the indoor unit, an attempt will be made
to contact the outdoor unit for synchronization. Once successful, the
outside temperature and the amount of rain (normally 0) will appear.
During reception, the icon " " will appear
It is recommended not to press any key for the first 5 minutes due to the
synchronization.
If the outdoor temperature does not appear after 5 minutes, repeat the
registration procedure.
TAKE NOTE: do not press any keys during the registration procedure.
DISPLAY
General:
The actual temperature is displayed correctly after several hours.
SETTING THE INDOOR UNIT
Time and date:
Through the steps below it is possible to set and change the date and time.
Do not set the time until the indoor unit and outdoor unit have connected.
Use the "SET" button to switch between the alarm and the time display.
Make sure the weather station displays the time. This can be recognised by
the blinking : between the hour and minute notation.
• Keep your finger on the "SET" key for 3 seconds to enter the settings
menu.
• Press "+" or "-" key to switch between 24 hour and 12 hour format.
• Press the "SET" key to confirm the selection.
• Press the "+" or "-" key to set the correct hour.
• Press the "SET" key to set the minutes.
• Press the "+" or "-" key to set the correct minutes.
• Press the "SET" key to set the year.
• Press the "+" or "-" key to set the correct year.
• Press the "SET" key to set the month.
• Press the "+" or "-" key to set the correct month.
• Press the "SET" key to set the date.
• Press the "+" or "-" key to set the correct date.
• Press the "SET" key to confirm the entry and return to the default screen.
• Press the "+" key to change between ºC or ºF in the default screen.
Pressing the "+" or "-" key for longer than 3 seconds will change the values
in larger increments.
Set and activate alarm clock or alarm.
The WS-1200 has an alarm clock function. After setting, 1 wake-up time can
be activated. The alarm will sound at that time.
-12-