Alecto WS-1200 Manual De Instrucciones página 14

If you have lost the overview of the settings or the WS-1200 indicates
a possible malfunction, it may be advisable to reset the indoor and rain unit.
• Remove the batteries from the indoor and from the rain unit. Wait at least
10 seconds. Then replace the batteries or replace them with new ones. then
see INSTALLATION. If this does not solve the problem, please contact the
Alecto customer service on telephone number +31 (0) 73 6411 355
Clean the indoor unit regularly with a slightly damp cloth.
Clean the rain unit on the outside with a slightly damp cloth. Make sure that
all holes on the outside (top and bottom) are open. Make sure the surface of
the rain collector is completely clean. Open the rain unit by gently pressing
the cover on the side and pulling it upwards.
Clean the inside of the rain unit of deposits, dirt and insects. Make sure the
rocker shaft is clean so that the rocker can move freely. After cleaning, place
the cover back on the rain meter
Indoor unit:
indoor temperature measurement range:
0°C ~ +50°C
resolution: 0.1°C
accuracy: 0°C - 40°C: 1°C
40°C - 50°C: 2°C
RESET/SYSTEM MALFUNCTION
MAINTENANCE
SPECIFICATIONS
-14-