Duronic HV180 Instrucciones De Uso página 10

• Before cleaning, turn off the heater. Unplug the power cable and allow the
heater to cool down.
• Do not put the heater away until it has cooled down completely. Store the
heater in cool dry location when not in use.
• This product is only suitable for well insulated spaces or occasional use.
• Remember, portable electric heaters are designed for spot heating, or as a
supplementary heat source. They are not intended to be main sources of
heat.
1. Position the heater carefully upside down.
2. Attach one leg at a time. Position the first leg onto the base and align with the
screw holes in the bottom of the heater.Insert two screws into the base of the
leg and tighten them up fixing the leg in place securely.
Repeat the same steps to attach the second leg.
Assembly Instructions
10