Sauder 428397 Instrucciones De Montaje página 18

Step 13
1
D575
Groove
å
Insert the DRAWER SIDES (D548 and D575) at an angle
into the slot at each end of the DRAWER FRONT (E).
3
1
M63
Surface with
HIDDEN CAM
å
Fasten the DRAWER BRACE (M63) to the DRAWER
FRONT (E). Tighten one HIDDEN CAM.
Page 18
The tabs should insert freely
into the slots. Gently tilt the
DRAWER SIDES side to side
until the tabs slip into the slots.
D548
E
Hidden part using
recycled material.
Color may vary.
E
2
D575
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT groove.
å
Slide the DRAWER BOTTOM (D729) into the grooves
in the DRAWER SIDES (D548 and D575) and DRAWER
FRONT (E).
4
D575
M63
å
Fasten the DRAWER BACK (D61) to the DRAWER
SIDES (D548 and D575) and DRAWER BRACE (M63).
Use five BLACK 1-9/16" FLAT HEAD SCREWS (30S).
å
Repeat this step for the remaining drawer.
428397
With the palm of your hand,
tap the DRAWER BOTTOM
down into the groove.
U n fi
n i s h
s u r
e d
f a c
e
D729
E
Start each screw a few turns before
completely tightening any of them.
30S
BLACK 1-9/16" FLAT HEAD SCREW
(10 used in this step)
D61
D548
www.sauder.com/service
9
D548
Be sure the
DRAWER
BOTTOM
inserts into
the DRAWER
BACK groove.