Pull - Sauder 428397 Instrucciones De Montaje

Step 18
å
Carefully stand your unit upright.
å
Pull the lower wing of the INTERLOCK MECHANISM (34G) forward until it clicks into place as shown in diagram 1.
å
To insert the lower drawer into your unit, line up the EXTENSION SLIDES on the drawers with the EXTENSION RAILS on
the unit and push the drawer into the unit until the drawer it is fully inserted.
å
NOTE: The lower DRAWER ACTUATOR will be near the top of the RIGHT DRAWER SIDE as shown in diagram 2.
å
Pull the upper wing of the INTERLOCK MECHANISM (34G) forward until it clicks into place as shown in diagram 3.
å
Insert the upper drawer by lining up the EXTENSION SLIDES on the upper drawer with the EXTENSION RAILS on the unit
as shown in diagram 4. Push the drawer in until it is fully inserted.
1
3
www.sauder.com/service
Pull the lower wing
forward until it clicks
into place.
34G
Pull the upper wing
34G
forward until it clicks
into place.
428397
4
l b s .
3 5
2
The Lower Drawer
ACTUATOR must
be here.
Page 23