Basic Disc, Usb Operation; Begin Playback; Pause Playback; Stop Playback - Furrion DV3100 Manual De Instrucciones

Basic Disc, USB Operation

Begin Playback

Press POWER button briefly to turn
on the DVD player.
After turning on the DVD player, please turn
on the monitor, and ensure that the video
output of the monitor is the video input from
the DVD player connected with the monitor.
? Common Question
Q: No displays on TV screen when the
DVD player is turned on. How to solve the
problem?
A: Ensure that the TV was set to right video
input (not TV channel); for example, if you
make VIDEO1 INPUT of TV and DVD player
connected with each other, then you need
set TV to VIDEO1.
Insert a disc into the DISC SLOT
(with labeled side facing up).
NOTE:
1. For some discs that are seriously
scratched or poor manufacturing or
recording quality, it may not play.
2. If the player can not read disc under
normal condition, please try to eject and
reload the disc again.
3. Remark:
● In addition to normal CD and DVD, this
unit supports to play CD-R, CD-R/W,
DVD-R and DVD-R/W as well; however,
depending on the conditions of the
recording equipment, recording program
or the disc itself, some CD-R, CD-R/W,
DVD-R or DVD-R/W may not play.
● When dealing with CD-R, CD-R/W, DVD-R
or DVD-R/W recording, too high recording
speed may result in poor signal quality
and therefore, it is recommendable to
select as lower as possible recording
speed.

Pause Playback

When playing DVD/VCD/CD/MP4/MP3/WMA
discs, press PLAY/PAUSE
front panel or remote control to pause the
playback, press PLAY/PAUSE
again to resume normal playback.

Stop Playback

When playing DVD/VCD/MP3/WMA/CD
discs, press STOP button once to pause the
playback, then press the PLAY button to
resume the normal playback; press STOP
button twice to stop the playback, then press
PLAY/PAUSE
from the beginning of the first chapter/track.

Select Chapter/Track with the

Button
Press
or
during playback to select the previous or next
chapter/track to playback.
Note: Press
multiple chapters/tracks backward or
forward.
Select Chapter/Track with the
Number Buttons
When playing DVD/VCD (PBC OFF)/MP3/
WMA/CD discs, press one of the 1~9 and the
0 number buttons to directly select and play
the 1st to 9th track/chapter.
If you want to play the track/chapter with
serial number bigger than 9, use the 10+, 1-9
and 0 button. For example 1, to play the 13th
track/chapter, firstly press the 10+ button
once, then press the 3 button. For example
2, to play the 34th track/chapter, firstly press
CCD-0005528 | REV DATE: 11.29.22
button to start playback
or Button or
or button on the front panel
/ button on the remote control
or
/ button multiple times to advance
button on the
button
I
button or press
18