Bluetooth Handsfree System - Furrion DV3100 Manual De Instrucciones

Bluetooth Handsfree System

Pairing and Connection
1. Turn on the Bluetooth mode off the
mobile phone;
2. Select the item of finding the Bluetooth
Device and enter it. After finishing the
finding, it will show the name of the
Bluetooth Device DV3100-X (where X can
be any number from 0-9999999). Select it
and enter it, then it will show an interface
that asks you to input a password, input
the password 0000 and enter it. Then it
will tell you pair OK.
3. For some mobile phones, they can
automatically connect with the BT device
of the car audio system after pairing is
ok; for some mobile phones, they need to
select the paired BT device and press the
CONNECTION button. When connection is
ok, the LCD off the car audio system will
show LINK ok.
Use The Mobile Phone to do
Connection or Disconnection
In the connection status, find the paired and
connected Bluetooth Device, then press
disconnection button to do disconnection.
In the disconnection status, find the paired
and disconnected Bluetooth Device, then
press the connection button to do connection.
Mobile Phone Transfers
In the connection status: Mobile phone
transfers to the car audio whenever dialing
takes place; Mobile phone transfers to the
car audio whenever receiving a call.
Note: Press BT MODE button on the front
panel to switch between Unit and Phone
during BT phone conversation.
Dialing When in Connection Status
1. Dial with the mobile phone directly.
2. Dial with remote control with the
following procedures:
● Input telephone number with number
● Short press TEL to execute the dialing.
3. To redial the last phone number dialed
● Short press TEL button on the remote
● Short press REDIAL button on the remote
Accept/Reject/End Call
1. Incoming call ringing, short press TEL
2. To reject incoming call ringing, short
3. During a phone call, short press HANG UP
To Play an Audio File from an
External Bluetooth Device (Mobile
Phone) on The Wall Mount Stereo
After the device has been paired successfully and
Wall Mount Stereo screen displays LINK OK:
If your mobile device supports A2DP you
will then be able to stream music from your
Bluetooth device so it can be played by stereo
speaker.
You must select on your mobile Bluetooth
device to play the audio through Bluetooth.
If your mobile device supports AVRCP then
you will be able to control the basic phone
audio output functions by the Wall Mount
Stereo controls. Eg.Play Pause.
Note: During other modes (except Bluetooth
conversation), press BT MODE button on the
front panel to switch the mode with others.
CCD-0005528 | REV DATE: 11.29.22
buttons 0-9.
* Short press CLEAR button to cancel the
wrongly input number if necessary
control or 1 button on the front panel, it
will show last phone number on the LCD,
then it will execute the dialing.
control, it will dial the last phone number.
button on the remote control or 1 button
on the front panel to accept the call.
press HANG UP button on the remote
control or 2 button on the front panel to
REJECT the call.
button on the remote control or 2 button
on the front panel to end the call.
Note: When an incoming call is present
the caller's phone number will be
displayed on the screen.
28