Playback The Picture Cd In Jpeg Format - Furrion DV3100 Manual De Instrucciones

Advanced Disc, USB Operation
For DVD discs/MP3/WMA
For VCD/CD discs
2. Use the direction buttons to move cursor
onto the desired place for inputting the
sequence number.
3. Use the number button to input desired
sequence number of title/chapter/track
with desired sequence.
4. Use the direction button to move cursor
onto PLAY, then press OK button on the
remote control to play the programmed
titles/chapters/tracks in programmed
order; only pressing PLAY/PAUSE
button also can play the programmed
titles/chapters/tracks in programmed
order.
● To exit program playback, firstly press
STOP button, then press PLAY/PAUSE
button to enter sequence playback; or
press PROG button twice again.
● To remove the all programmed sequence
numbers, move the cursor onto CLEAR,
then press OK button on the remote
control.
● To change the programmed sequence,
move the cursor onto the item you want
to change, input the desired sequence
number.
● During VCD playback, if it is in PBC ON
Playback the Picture CD in JPEG
Format
1. The root menu is displayed on the monitor
2. When displaying the root menu, press the
3. During JPEG playback, press one of the
● During JPEG playback, the following
CCD-0005528 | REV DATE: 11.29.22
mode, at the same time of entering the
state of program playback, it turns off
PBC mode.
when beginning to switch on DISC mode.
At the time, it plays MP3/WMA file. (TITLE
or PBC button is not available)
In the root menu, the left file sort icon
is for MP3/WMA file; the middle file sort
icon is for VIDEO file; the right file sort
icon is for JPEG file. If one off these 3
file sort does not exist, you can not move
cursor onto the file sort icon.
direction buttons to select your desired
FOLDER, file or file sort icon, then press
OK or PLAY/PAUSE
the FOLDER, or play the selected file, or
play only this sort of file. When displaying
the root menu, you can also use the
number buttons to select the serial
number of the file and play the file.
When you select a JPEG file sort icon,
press one of the direction buttons to
select the first JPEG file, then press the
v button to select the desired JPEG file,
finally press OK or PLAY/PAUSE
button to display the JPEG picture in full
screen from the selected JPEG picture.
direction buttons to change the angle
of viewing picture that is displaying as
follows:
>: 90 deg cw; <: 90deg ccw; ^:UP<-->DOWN;
v: LEFT<-->RIGHT
During JPEG playback, press PROG
button on the remote control to change
the mode of refresh picture. During JPEG
playback, press STOP button to stop
playing and return to the root menu.
button to open
22