Service; Cleaning; Cleaning The Lens; Update Software - Philips NeoPix Ultra 2 Manual De Usuario

9 Service

Cleaning

DANGER!
Instructions for cleaning!
Use a soft, lint-free cloth. Never use
liquid or easily flammable cleansers
(sprays, abrasives, polishes, alcohol,
etc.). Do not allow any moisture to
reach the interior of the projector.
Do not spray the projector with any
cleaning fluids.
Wipe over the surfaces gently. Be
careful that you do not scratch the
surfaces.

Cleaning the lens

Use a soft brush or lens cleaning paper for
cleaning the lens of the projector.
DANGER!
Do not use any liquid cleaning agents!
Do not use any liquid cleaning
agents for cleaning the lens, to avoid
damaging the coating film on the lens.

Update software

The latest software of the projector can be
found on www.philips.com/support for you
to get the best features and support from the
projector.
Before you update the software of the
projector, check the current software version:
• On the home screen, press
to display the shortcut options. Then select
the icon on the upper right of the home
screen and press OK, then go to About -
System Version.
CAUTION!
Do not turn off the projector or remove
the USB flash drive during the update.
Service
Update SW through Internet
1
2
3
Update SW through USB
1
2
3
4
once or more
5
Connect the projector to the Internet.
On the home screen, press
to display the shortcut options. Then select
the icon on the upper right of the home
screen and press OK, then go to System
Update - Online Update.
• If an upgrade media is detected, you
are prompted to start or cancel the
update.
Follow the on-screen instructions to
complete the update.
Check the latest software version on
www.philips.com/support. Find your
product (model number: NPX642/INT), and
locate 'Software and drivers'.
Download the software into the USB flash
drive. Unzip the downloaded software file
and save it in the root directory of the USB
flash drive.
• After unzipping, make sure "KJ-3S027.
bin" file is included.
Connect the USB flash drive to the
projector.
On the home screen, press
to display the shortcut options. Then select
the icon on the upper right of the home
screen and press OK, then go to System
Update - Local Update.
Follow the on-screen instructions to
complete the update.
once or more
once or more
23