SOMFY Oximo io Manual página 8

EN
Check the direction of rotation; if this is correct,
2)
move on to step 3). If the direction of rotation is
not correct, press the "my" button until the blind
moves briefly (2 s).
Position the blind at the lower end limit using the
3)
transmitter's up and down buttons.
Simultaneously press the transmitter's "my" and
4)
up buttons; the blind is lowered and the lower end
limit is set.
Press the "my" button to stop the blind.
5)
Press the "my" button until the blind moves briefly
6)
(2 s): the end limit is memorised.
Press the "PROG" button on the transmitter
7)
briefly: the blind moves briefly; the transmitter is
memorised.
The blind is operating in one-touch mode: briefly
pressing the up or down button raises or lowers it
completely.
2.3.7. Adjusting the manual upper and automatic
lower end limits
Simultaneously press the Up and Down buttons:
1)
the blind moves briefly.
Check the direction of rotation; if this is correct,
2)
move on to step 3). If the direction of rotation is
not correct, press the "my" button until the blind
moves briefly (2 s).
Position the blind at the lower end limit using the
3)
transmitter's up and down buttons.
Simultaneously press the transmitter's "my" and
4)
down buttons; the blind is lowered and the upper
end limit is set.
Press the "my" button to stop the blind.
5)
Press the "my" button until the blind moves briefly
6)
(2 s): the end limit is memorised.
Press the "PROG" button on the transmitter
7)
briefly: the blind moves briefly; the transmitter is
memorised.
The blind is operating in one-touch mode: briefly
pressing the up or down button raises or lowers it
completely.
6
Copyright © 2006-2017 SOMFY ACTIVITES SA, Société Anonyme. All rights reserved. Images are not contractually binding.
2)
3)
4)
6)
7)
[1]
[1]
2)
[2]
[2]
[3]
3)
[4]
[4]
4)
6)
7)
[8]
3)
5)
1)
[4]
3)
[4]
[4]
[3]
[4]
5)
[5] [6]
[7]
3)
3)
[4]