Use Of The Microscope (Fluorescence Reflected Light); Assembling Procedure (B-383Fl); Assembling Procedure (B-383Ld) - Optika Italy B-380 Serie Manual De Instrucciones

14. Use of the microscope (Fluorescence reflected light)

This section refers exclusively to the use of the reflected light fluorescence microscope.
For transmitted light operations, refer to this manual in sections 9-10-11 from page 18 to page 22.

14.1 Assembling procedure (B-383FL)

1. Insert the round dovetail socket of the illuminator
hole in the microscope body and tighten the locking screw
②. (Fig. 33).
2. Install the observation head as already explained at page 16.

14.2 Assembling procedure (B-383LD)

1. Insert the round dovetail socket of the illuminator
hole in the microscope body and tighten the locking screw
④. (Fig. 34).
2. Connect the cable into the socket
of the microscope. (Fig. 35)
3. Install the observation head and tighten the locking screw ⑥.
(Fig. 36)
into the
①
into the
③
placed in the back side
⑤
Page 27
①
③
②
F ig. 33 F ig. 33
④
F ig. 34 F ig. 34
⑤
F ig. 35 F ig. 35
⑥
F ig. 36 F ig. 36