Bosch 0 275 U07 3SC Instrucciones De Servicio Originales página 334

English – 12
The eBike is unlocked when the eBike system is
switched on and the smartphone is connected with
the eBike via Bluetooth®.
<eBike Lock> is connected to your user account.
Should you lose your smartphone, you can log in via
another smartphone using the eBike Flow app, and
unlock your user account and the eBike.
Warning! If you select a setting in the app that leads
to disadvantages for the <eBike Lock> (e.g. deletion
of your eBike or user account), then you will first be
shown warning messages. Please read through
these thoroughly and adhere to the warnings that
are issued (e.g. before deleting your eBike or user
account).
In order to be able to set up the <eBike Lock>, the
following conditions must be fulfilled:
– The eBike Flow app has been installed.
– A user account has been created.
– No update is currently being carried out on the
eBike.
– The eBike is connected to the smartphone via
Bluetooth®.
– The eBike is stationary.
– The smartphone is connected to the Internet.
– The eBike rechargeable battery is sufficiently
charged, and the charging cable is not connected.
You can set up <eBike Lock> in the eBike Flow app
under the settings menu item.
You can deactivate the support of your drive unit with
immediate effect by switching on <eBike Lock> in
the eBike Flow app. Deactivation can only be can-
celed if your smartphone is nearby when switching on
the eBike system. Your smartphone must have
Bluetooth® switched on for this, and the eBike Flow
app must be active in the background. The eBike
Flow app does not have to be opened. If <eBike
Lock> is activated, you can also use your eBike with-
out support from the drive unit.
Compatibility
<eBike Lock> is compatible with these Bosch eBike
product lines:
0 275 U07 3RL | (09.03.2022)
Drive unit
BDU374x
BDU33xx
How it works
In conjunction with <eBike Lock>, the smartphone
works in a similar way to a key for the drive unit.
<eBike Lock> becomes active when the eBike sys-
tem is switched off. As long as the <eBike
Lock> eBike lock is active after switching on, this is
indicated on the LED Remote operating unit by flash-
ing white and on the display computer with a padlock
symbol.
Note: <eBike Lock> alone does not provide ade-
quate theft protection; it is simply a supplement to a
mechanical lock. <eBike Lock> does not provide any
form of mechanical lock for the eBike. Only the assis-
tance from the drive unit is deactivated. As long as
the smartphone is connected with the eBike via
Bluetooth®, the drive unit is unlocked.
If you give third parties temporary or permanent ac-
cess to your eBike or want to bring your eBike in for a
service, deactivate <eBike Lock> in the eBike Flow
app under the settings menu item. If you want to sell
your eBike, also delete the eBike from your user ac-
count in the eBike Flow app under the settings menu
item.
If the eBike system is switched off, the drive unit will
emit a "Lock" sound (i.e. an audio signal that is played
once) to indicate that the assistance from the drive
unit is switched off.
Note: The audio signal will only be played if the sys-
tem is switched on.
If the eBike system is switched on, the drive unit will
emit two "Unlock" sounds (i.e. an audio signal that is
played twice) to indicate that the assistance from the
drive unit is enabled again.
The "Lock" sound helps you to recognize whether
<eBike Lock> is activated on your eBike. The audio
signal is activated by default, it can be deactivated in
the eBike Flow app under the settings menu item by
selecting the lock symbol below your eBike.
Product line
Performance Line CX
Performance Line
Bosch eBike Systems