Publicidad
Idiomas disponibles
Idiomas disponibles
USE OF COMPRESSED AIR
Never exceed the maximum air pressure listed on the back of the machine and in this manual
Pressurised air can cause serious injury. It is recommended that the machine be disconnected from the compressed air
supply before changing arms or attachments.
Drain the hose before use.
Disconnect the air supply when the tool is not in use.
Never carry the riveter by the hose.
REPLACEMENT OF ARMS AND ACCESSORIES
Only use arms and accessories recommended by GYS.
NOISE
Weighted sound power level : LWA = 72 dB.
VIBRATION
Triaxial vibration rate: ah = 5.6 m/s²
WASTE DISPOSAL
When disposing of the GYSpress 10T, it must not be abandoned in nature and taken to an authorised recycling centre.
INSTALLATION - PRODUCT OPERATION
DESCRIPTION
The riveting machine has been especially made for the main types of rivets used and homologated for car body repair:
• Self-piercing rivets
• Flow-form rivets
TECHNICAL DATA
Riveter weight
Max. air pressure
Maximum clamping force
HANDLING
The correct handling procedures are explained in this user manual. It is vital that the GYS operating procedures are
followed.
COMPRESSED AIR CONNECTION
GYSPRESS 10T US
3.450 kg
110 psi
100 kN
EN
15
15
Publicidad
