Window Sealing Kit - Unold ARCTIC 7k Instrucciones De Uso

WINDOW SEALING KIT

a
d
c
3. Start by cleaning the adhesive surface on the window pane and window sash
thoroughly.
4. Now, apply the included adhesive hook-and-loop tape to each outer edge of
the window sash. Since the hook-and-loop tape is self-adhesive, only pull off
a small portion of the protective film at a time and apply the hook-and-loop
to the window sash.
5. Next, apply the hook-and-loop tape to the window frame.
Stand 9.8.2022
4. Next, plug the exhaust hose adapter (1) into
the hose connector on the appliance. Line up the
adapter on the left, making sure that the release lever
is positioned on the left, before pressing the lever to
the right until the adapter has locked into place.
5. Clamp the open end of the hose into the
open window. Make sure to seal the rest of the open
windows in order to conserve energy. If the window is
fitted with an outer shutter, lower the shutter as much
as possible.
1. The kit is suited for casement windows
and top-hung windows (top-hung roof windows
that can be hinged open all the way).
2. The length of the sealing film is
b
approx. 390 cm. To calculate if this length
is sufficient for your window, you need to
measure all four sides of the window. If the
total length of the window sides a+b+c+d
is less than 390 cm, you can use the kit. If
the window circumference is greater, you will
need to use a different sealing option.
DE
EN
FR
NL
IT
ES
PL
39 von 152