HOLL'S Utopia Manual De Instalación página 36

16
ASSEMBLY
UTOPIA 6
Step 10
position the backrests on the horizontal cleats, then
screw them.
Step 11
Connect the connection plugs of the LED strips of the
backrests to the sockets available on the rear panel.
Step 12
Please place and screw the pan support accor-
ding to the position of the ventilation
Connect the stove electrically as well
as the electrical elements of the ca-
bin, then install it and add the stones
on top in a homogeneous manner.
Do not drop stones into the stove.
Do not wedge the stones between
the resistances.
The stones must not be too tight, they
must support each other without res-
ting on the resistances.
Also connect the
between the roof and the rear
panel.
cables