Electrical Shock Hazard - sangiorgio F814CD Manual De Operación Y Mantenimiento

ing which are sources of potential fire
hazard. The manufacturer declines any
responsibility for damages due to failure
or inappropriate protective connecting
point.
To enhance safety, VDE in the directive
DIN VDE 0100 in section 739, has rec-
ommended to install a circuit breaker
(RCD) with a tripping current of 30 mA
(DIN VDE 0664).
If using a differential circuit breaker, make
sure it is type A, according to DIN VDE
0664 and current sensitive buttons.
The rating plate provides information
on rated current absorption and relating
protection. Compare these data with the
power supply.
After having installed the appli-
ance, the power cord must be ac-
cessible.
If the power cord is damaged, it
must be substituted by the manu-
facture, its qualified technician
with aim of avoiding dangers.
39601005005 - Mutilingua Pittogrammi.indb 13
Figure 8
ELECTrICAL sHOCK
HAzArD
NOT KEEpING TO THIs
INsTrUCTION COULD
ENDANGEr THE UsEr.
THIs WAsHING
rEQUIrEs EArTH WIrING.
For personal safety, this washing
machine must be grounded.
This washing machine is equipped
with a power cord (A) and with a
plug (B).
To minimize the risk of electric
shock, the cable must be plugged
into socket (C) that fits the plug (B).
If the socket is not available, it will
be sole responsibility and duty of
the user to have it installed by a
qualified electrician.
Do not change/modify the power
cord and do not use adapters or
extension cables (D).
Figure 8b
MACHINE
EN
13
06/07/2018 17.43.51