sangiorgio F814CD Manual De Operación Y Mantenimiento página 96

IMPORTANT OPERATIONAL
PHASE 1 : REMOVAL OF FIXING SCREWS
Fig.1
PHASE 2 : WATER CONNECTION
Check for leaks after connection to the water supply.
PHASE 4 :
THIS MACHINE REUIRES GROUNDING (EARTHING)
2
39601005005 - Mutilingua Pittogrammi.indb 2
INSTRUCTIONS
1 2
3 4
ELECTRICAL SPECIFICATIONS
D
Fig.2
1
Remove the screws include spacers by
pulling outward (Figure 2.)
PHASE 3 :PLACEMENT
Place the washing machine on a non-elevated level or
plain of the floor. After offseting any unevenness
by the regulating the leveling feet, it should be locked by
the locking nut.
Electric shock hazard: the lack of these warnings
can be harmful to health.
For your personal safety, this washing machine must be connected to
earth device.
If earthing device not installed, it must be installed by a qualified
technician before starting the machine.
This washing machine is equipped with a power cord (A) and
with a plug (B).
To minimize the risk of electric shock, the cable must be
plugged into a wall socket (C) that accepts the plug (B).
If the wall socket is not available it is a personal responsibility
and th duty of the client to have it installed by a qualified electrician.
Do not change/modify the power cord and do not use
adapters or extension cords (D).
Carefully read the instruction booklet
2
Cabinet
Locking
nut
Leveling feet
06/07/2018 17.43.12